[
Date Prev][
Date Next][
Thread Prev][
Thread Next][
Date Index][
Thread Index]
20000814: 20000810: Satellite imagery with Garp
- Subject: 20000814: 20000810: Satellite imagery with Garp
- Date: Mon, 14 Aug 2000 15:38:05 -0600
Pat,
First, I'm assuming you are launching garp from the NTL
launcher to ensure that the color table is guaranteed-
if not, make sure you launchg garp that way.
I have a solaris binary of garp under:
~gbuddy/nawips-5.4/binary/solaris/garp
If you can ftp that to your /tmp directory and
"chmod 775 garp", then run it with /tmp/garp
(ensuring that your ntl has been launched first)
we can see if the same problem exists using my binary.
Otherwise, I don't see a problem with your GOES-8 directory.
Steve Chiswell
>From: Local Data Manager <address@hidden>
>Organization: UCAR/Unidata
>Keywords: 200008142024.e7EKOdN13936
>>
>> >From: Local Data Manager <address@hidden>
>> >Organization: UCAR/Unidata
>> >Keywords: 200008141326.e7EDQIN21293
>>
>> >Steve:
>> >
>> >I performed the cd $SAT and ls -R and all of the files came up with a
>> >YYYY configuration, as my Garp_defaults file commands. GARP still
>> >crashes.
>> >
>> >Pat
>> >
>>
>>
>> Pat,
>>
>> You might try shortening the list of directories that sat searches
>> as I mentioned previously. It could be that your path is too long.
>> Do we have a core dump? If so, that will tell us where the program
>> is bombing. Otherwise, please send me the output from ls -R as well
>> as your Garp_defaults file.
>>
>> Steve Chiswell
>> ****************************************************************************
>> Unidata User Support UCAR Unidata Program
>> (303)497-8644 P.O. Box 3000
>> address@hidden Boulder, CO 80307
>> ----------------------------------------------------------------------------
>> Unidata WWW Service http://www.unidata.ucar.edu/
>> ****************************************************************************
>>
>
>Steve:
>
>I have shortened our list of directories to search to just one, GOES-8, and it
> still
>does not work. I cannot find a core in any of the usual spots, so I think it
> may be
>the path. A typical one would be something like:
>
> /asp/met/data/ldm/gempak/images/sat/GOES-8/8km/6.8
>
>Below is the output of ls -R in $SAT, and the Garp_defaults file. Thanks for
> your
>help.
>
>::::::
>ls -R
>::::::
>
>Isentropic Highlander =>cd $SAT
>/asp/met/data/ldm/gempak/images/sat
>Isentropic Highlander =>ls -R
>ANTARCTIC GOES-8 GOES-8_fl2 MOLL-IR
>GOES-10 GOES-8_fl1 MDR MOLL-WV
>
>ANTARCTIC:
>20km
>
>ANTARCTIC/20km:
>10.7 IR
>
>ANTARCTIC/20km/10.7:
>10.7_20000813_1800 10.7_20000814_0000 10.7_20000814_0600 10.7_2
> 0000814_1200
>10.7_20000813_2100 10.7_20000814_0300 10.7_20000814_0900 10.7_2
> 0000814_1500
>
>ANTARCTIC/20km/IR:
>
>GOES-10:
>4km 8km
>
>GOES-10/4km:
>0.65 10.7 IR VIS
>
>GOES-10/4km/0.65:
>0.65_20000813_2000 0.65_20000814_0300 0.65_20000814_1600 0.65_2
> 0000814_1900
>0.65_20000813_2100 0.65_20000814_1400 0.65_20000814_1700
>0.65_20000813_2300 0.65_20000814_1500 0.65_20000814_1800
>
>GOES-10/4km/10.7:
>10.7_20000813_2000 10.7_20000814_0400 10.7_20000814_1000 10.7_2
> 0000814_1500
>10.7_20000813_2100 10.7_20000814_0500 10.7_20000814_1100 10.7_2
> 0000814_1600
>10.7_20000813_2300 10.7_20000814_0600 10.7_20000814_1200 10.7_2
> 0000814_1700
>10.7_20000814_0100 10.7_20000814_0700 10.7_20000814_1300 10.7_2
> 0000814_1800
>10.7_20000814_0300 10.7_20000814_0800 10.7_20000814_1400 10.7_2
> 0000814_1900
>
>GOES-10/4km/IR:
>
>GOES-10/4km/VIS:
>
>GOES-10/8km:
>6.8 WV
>
>GOES-10/8km/6.8:
>6.8_20000813_1900 6.8_20000814_0200 6.8_20000814_0800 6.8_20
> 000814_1500
>6.8_20000813_2000 6.8_20000814_0300 6.8_20000814_1000 6.8_20
> 000814_1600
>6.8_20000813_2100 6.8_20000814_0400 6.8_20000814_1100 6.8_20
> 000814_1700
>6.8_20000813_2200 6.8_20000814_0500 6.8_20000814_1200 6.8_20
> 000814_1800
>6.8_20000814_0000 6.8_20000814_0600 6.8_20000814_1300 6.8_20
> 000814_1900
>6.8_20000814_0100 6.8_20000814_0700 6.8_20000814_1400 6.8_20
> 000814_2000
>
>GOES-10/8km/WV:
>
>GOES-8:
>4km 8km
>
>GOES-8/4km:
>0.65 10.7 IR VIS
>
>GOES-8/4km/0.65:
>0.65_20000813_2015 0.65_20000814_1115 0.65_20000814_1415 0.65_2
> 0000814_1715
>0.65_20000813_2215 0.65_20000814_1215 0.65_20000814_1515 0.65_2
> 0000814_1815
>0.65_20000814_1015 0.65_20000814_1315 0.65_20000814_1615 0.65_2
> 0000814_1915
>
>GOES-8/4km/10.7:
>10.7_20000813_2015 10.7_20000814_0515 10.7_20000814_1015 10.7_2
> 0000814_1515
>10.7_20000814_0115 10.7_20000814_0615 10.7_20000814_1115 10.7_2
> 0000814_1615
>10.7_20000814_0215 10.7_20000814_0715 10.7_20000814_1215 10.7_2
> 0000814_1715
>10.7_20000814_0315 10.7_20000814_0815 10.7_20000814_1315 10.7_2
> 0000814_1815
>10.7_20000814_0415 10.7_20000814_0915 10.7_20000814_1415 10.7_2
> 0000814_1915
>
>GOES-8/4km/IR:
>
>GOES-8/4km/VIS:
>
>GOES-8/8km:
>6.8 WV
>
>GOES-8/8km/6.8:
>6.8_20000813_2015 6.8_20000814_0215 6.8_20000814_0915 6.8_20
> 000814_1515
>6.8_20000813_2115 6.8_20000814_0315 6.8_20000814_1015 6.8_20
> 000814_1615
>6.8_20000813_2215 6.8_20000814_0415 6.8_20000814_1115 6.8_20
> 000814_1715
>6.8_20000813_2315 6.8_20000814_0515 6.8_20000814_1215 6.8_20
> 000814_1815
>6.8_20000814_0015 6.8_20000814_0715 6.8_20000814_1315 6.8_20
> 000814_1915
>6.8_20000814_0115 6.8_20000814_0815 6.8_20000814_1415
>
>GOES-8/8km/WV:
>
>GOES-8_fl1:
>1km 4km
>
>GOES-8_fl1/1km:
>0.65 VIS
>
>GOES-8_fl1/1km/0.65:
>0.65_20000813_1915 0.65_20000813_2315 0.65_20000814_1415 0.65_2
> 0000814_1815
>0.65_20000813_2015 0.65_20000814_1115 0.65_20000814_1515 0.65_2
> 0000814_1915
>0.65_20000813_2115 0.65_20000814_1215 0.65_20000814_1615
>0.65_20000813_2215 0.65_20000814_1315 0.65_20000814_1715
>
>GOES-8_fl1/1km/VIS:
>
>GOES-8_fl1/4km:
>3.9
>
>GOES-8_fl1/4km/3.9:
>3.9_20000814_0015 3.9_20000814_0415 3.9_20000814_0715 3.9_20
> 000814_1015
>3.9_20000814_0215 3.9_20000814_0515 3.9_20000814_0815
>3.9_20000814_0315 3.9_20000814_0615 3.9_20000814_0915
>
>GOES-8_fl2:
>1km 4km
>
>GOES-8_fl2/1km:
>0.65 VIS
>
>GOES-8_fl2/1km/0.65:
>0.65_20000813_1915 0.65_20000813_2315 0.65_20000814_1415 0.65_2
> 0000814_1815
>0.65_20000813_2015 0.65_20000814_0115 0.65_20000814_1515 0.65_2
> 0000814_1915
>0.65_20000813_2115 0.65_20000814_1215 0.65_20000814_1615
>0.65_20000813_2215 0.65_20000814_1315 0.65_20000814_1715
>
>GOES-8_fl2/1km/VIS:
>
>GOES-8_fl2/4km:
>3.9
>
>GOES-8_fl2/4km/3.9:
>3.9_20000814_0215 3.9_20000814_0515 3.9_20000814_0815 3.9_20
> 000814_1115
>3.9_20000814_0315 3.9_20000814_0615 3.9_20000814_0915
>3.9_20000814_0415 3.9_20000814_0715 3.9_20000814_1015
>
>MDR:
>5km
>
>MDR/5km:
>MDR
>
>MDR/5km/MDR:
>MDR_20000813_1859 MDR_20000814_0259 MDR_20000814_0959 MDR_20
> 000814_1659
>MDR_20000813_1959 MDR_20000814_0359 MDR_20000814_1059 MDR_20
> 000814_1759
>MDR_20000813_2059 MDR_20000814_0459 MDR_20000814_1159 MDR_20
> 000814_1859
>MDR_20000813_2159 MDR_20000814_0559 MDR_20000814_1259 MDR_20
> 000814_1959
>MDR_20000813_2259 MDR_20000814_0659 MDR_20000814_1359
>MDR_20000814_0059 MDR_20000814_0759 MDR_20000814_1459
>MDR_20000814_0159 MDR_20000814_0859 MDR_20000814_1559
>
>MOLL-IR:
>56km
>
>MOLL-IR/56km:
>10.7
>
>MOLL-IR/56km/10.7:
>10.7_20000813_1800 10.7_20000814_0300 10.7_20000814_1200
>10.7_20000813_2100 10.7_20000814_0600 10.7_20000814_1500
>10.7_20000814_0000 10.7_20000814_0900 10.7_20000814_1800
>
>MOLL-WV:
>56km
>
>MOLL-WV/56km:
>6.8
>
>MOLL-WV/56km/6.8:
>6.8_20000813_1800 6.8_20000814_0300 6.8_20000814_0900 6.8_20
> 000814_1500
>6.8_20000813_2100 6.8_20000814_0600 6.8_20000814_1200 6.8_20
> 000814_1800
>Isentropic Highlander =>
>
>
>:::::::::::::
>Garp_defaults
>:::::::::::::
>
>
>#
># Garp configuration file
># VERSION 2.0
>#
># The syntax needed in the file is:
>#
># token : resource
>#
># where:
>#
># - token is defined as a string delimited by white space or ","
># - the delimiter between token and resource is the :,
># - no white space needs to surround the delimiter,
># - comments are indicated by a #,
># neither token nor resource can begin with a # or :,
># however a # or a : can be embedded within resource,
># - resource can contain white space if it is bounded by
># the ' or " characters,
># - blank lines are allowed.
># - referbacks are indicated by $(...). The '...' is resolved
># the same way any other token is, and is substituted for
># the $(...) string to compose the final resource value.
># - Multiple referbacks are allowed in a resource, but
># embedded referbacks are not allowed (i.e. no
># $($(...)) allowed).
># - case for the token is significant
># LOG:
># D.Himes/COMET 4/96 Beta dist version
># P.Bruehl/NWS 4/96 Documented, reorganized
># P.Bruehl/NWS 5/96 Added SD's keys for file names
># P.Bruehl/NWS 5/96 Updated for GARP release 0.1
># P.Bruehl/NWS 8/96 Updated for GARP release 0.2
># J.Cowie/NWS 10/96 Updated for GARP release 1.0
># S.Drake/COMET 1/97 Added keys for upper air profile object.
># P.Bruehl/NWS 1/97 Updated for GARP 1.03 release
># S.Drake/COMET 4/97 Added keys for 1.0.4
># P.Bruehl/NWS 4/97 Updated for GARP 1.04 release
># S.Chiswell/Unidata 5/97 New & corrected map areas and projections
># S.Drake/COMET 7/97 Added keys for GARP release 2.0
># S.Drake/COMET 10/98 Added wind profiler keys for release 2.02
># S.Drake/COMET 8/99 Removed chapter "default" from FDF directories
>#-----------------------------------------------------------------------
>#
># Data directory Structures
># Case is important
># Configure these to match your data directory structure
># (Surface data directories defined later)
>#
>GARPHOME : $(NAWIPS)/garp/
>
>SATDIR : $(SAT)
>RADDIR : $(GEMDATA)/nexrad
>grids : $(HDS)
>upperair : $(GEMDATA)/upperair
>profiler : $(GEMDATA)/profiler
>surface : $(GEMDATA)/surface
>
>#
># Provide extra information for the satellite data
>#
># List each individual satellite directory
># Multiple entries are space separated
>#
>G7 : "$(SATDIR)/GOES-7"
>G8 : "$(SATDIR)/GOES-8"
>G9 : "$(SATDIR)/GOES-9"
>G10 : "$(SATDIR)/GOES-10"
>FLOAT1 : "$(SATDIR)/GOES-8_fl1 $(SATDIR)/GOES-9_fl1 $(SATDIR)/GOES-10_fl1"
>FLOAT2 : "$(SATDIR)/GOES-8_fl2 $(SATDIR)/GOES-9_fl2 $(SATDIR)/GOES-10_fl2"
>SPOLE : "$(SATDIR)/ANTARCTIC"
>GINI : "$(SATDIR)/GINI-E $(SATDIR)/GINI-W $(SATDIR)/Colorado $(SATDIR)/COMP $
> (SATDIR)/GINI-US $(SATDIR)/GINI-PR $(SATDIR)/GINI-HI $(SATDIR)/GINI-PAC $(SAT
> DIR)/Alaska"
>#GMS : "$(SATDIR)/GMS_RAM"
>COMPOSITE : "$(SATDIR)/comp"
>MDR : "$(SAT)/MDR"
>
>#
># sat, nids, and nowrad are the "keys" that are used to find
># the image data directories
>#
># Be sure each individual satellite directory listed above is in
># the "sat" key list
>#
>#sat : "$(G8) $(G10) $(MDR) $(FLOAT1) $(FLOAT2)"
>sat : "$(G8)"
>nids : $(RADDIR)/NIDS
>nowrad : $(RADDIR)/USRAD
>
>#
># File name keys
># Upper air & profile only
># (keys for surface and model data files are defined later)
>#
># These key values correspond to the "type" substring in the file
># name convention for a upper air & profile data types. For example,
># YYMMDD_"type".gem
>#
># Note, you must choose a unique key value to describe each data type.
># For example the key "upa" will match ALL data filenames containing
># the string "upa".
>#
>upperairK : upa
>profilerK : 6min
>
>#
># Dynamically generated menus.
>#
># Models, Vertical coordinates, Color contours, Color fill tables,
># Font types & sizes, Station Overlays, Surface keys, Markers,
># Image Maps, Geographical areas & projections, FDF chapters, line
># parameters, vector symbols, x-sec vertical axes, vertical
># profile vert axes, time/height time axes.
>#-------------------------------------------------------------
># Models
>#
># List all models for GARP to display. Objective Analysis grids
># are OK. Make up a name for "modellabels". The corresponding
># string in "modelkeys" must make a unique match to files in the
># $(grids) directory.
>#
># For example, the string "eta" matches YYMMDDHH_eta.gem *and*
># YYMMDDHH_mesoeta.gem. Better choices are "_mesoeta" and "_eta".
>#
>modelkeys : "_thin,_avn,_eta,_mrf,_nhmrf,_ngm,_ruc,_ecmwf1,_ecmwf2"
>modellabels : "AVN_Thin,AVN_211,Eta_211,MRF_EXT,MRF_NH,NGM_211,RUC_211,ECMW
> F_G,ECMWF_T"
>#modelkeys : "thin,avn003,eta211,eta212,mrf003,mrf002,ngm211,ruc211,maps,e
> ns,gdas,ecmf1"
>#modellabels : "AVN,AVN Grid3,Eta 211,Eta 212,MRF,MRF_EXT,NGM,RUC,RUC II,Ens
> emble,GDAS,ECMWF"
>#
>#-------------------------------------------------------------
># Vertical coordinate keys for plan view.
>#
>vcoordkeys : "pres,sgma,thta,hght,none,none,hagl,pagl,frzl,trop,mwsl"
>vcoordlabels : "Pressure,Sigma,Isentropic,Height,Surface,None,Hght agl,Press
> agl,Freezing Lvl,Tropopause,Max Wind Speed"
>#
>#-------------------------------------------------------------
># Vertical coordinate keys for vertical profiles.
>#
>vpvcoordkeys : "pres,sgma,thta,hght"
>vpvcoordlabels : "Pressure,Sigma,Isentropic,Height"
>#
>#-------------------------------------------------------------
># List colors to be used for contour lines, symbols, etc.
># Use no more that 10 GEMPAK colors in list.
>#
>colorlist : "3,6,5,2,4,7,8"
>#
>#-------------------------------------------------------------
># Color fill tables
>#
>#colorfillkeys : "0;23-15,0;25;24;29;7;15,0;21-30;14-20;5,0;24;30;14;2,0;23;22
> ;21;2"
>#colorfilllabels : "Table 1,Table 2,Table 3,Table 4,Table 5"
>colorfillkeys : "0;21-30,0;14-20,25;24;29;7;15,0;21-30;14-20;5,0;24;30;14;2,
> 0;23;22;21;2"
>colorfilllabels : "Cool,Hot,Table 1,Table 2,Table 3,Table 4"
>#
>#-------------------------------------------------------------
># Font type, size and hardware/software flag. (See "Font" entry
># in Chapter 3 of the NAWIPS Users Manual for help.)
>#
>text_size : 1.3
>text_font : 21
>text_width : 1
>text_hw_flag : hw
>#
>#-------------------------------------------------------------
># Station overlays
>#
>stn_tables: "0,1,2,3,4,5,6,7"
>stn_labels: "Surface Airways,WFO,NEXRAD,Wind Profiler,Upper Air Stations,Count
> ies,Local,Cities"
>#-------------------------------------------------------------
># Surface keys
>#
># sfc_keys - Strings corresponding to the unique "type" substring in
># the filename convention for a given surface data type.
># For example, YYMMDD_"type".gem: 980101_sao.gem, 980101_shb.gem
>#
># sfc_labels - Labels corresponding to above sfc_keys.
>#
># sfc_tables - Tables containing complete list of all valid parameters
># for a given surface data type. Corresponds to sfc_keys and sfc_labels.
>#
># xxx_dir - Directory containing surface data files of the xxx type
># xxx_parms - Default list of parameters plotted for the xxx data type
>#
># Examples:
># sfc_keys: "surf,shb,amos,mmos,nmos,ffg,sels,ltg"
># sfc_labels: "METAR,Ship/Buoy,AVN MOS,MRF MOS,NGM MOS,Flash Flood,Storm Warni
> ngs,Lightning"
># sfc_tables: "sfcparms.lst,shbparms.lst,amosparms.lst,mmosparms.lst,nmosparms
> .lst,
># ffgparms.lst,selsparms.lst,"
># surf_dir : $(METDAT)/gempak/surface
># shb_dir : $(METDAT)/gempak/surface
># amos_dir : $(METDAT)/gempak/mos
># nmos_dir : $(METDAT)/gempak/mos
># mmos_dir : $(METDAT)/gempak/mos
># ffg_dir : $(METDAT)/gempak/flood
># sels_dir : $(METDAT)/gempak/storm
># surf_parms: "SKYC:1.0:1;TMPF;WSYM:1.0:1;SMSL;P03C;DWPF;P03I;BLNK;BLNK;BLNK;B
> RBK:1.0:1"
># shb_parms: "SKYC:1.0:1;TMPF;WSYM:1.0:1;SMSL;BLNK;WPER;WHGT;SSTC;BRBK:1.0:1"
># amos_parms: "BLNK;TMPF;BLNK;CLCT;BLNK;PP12"
># mmos_parms: "SKNT;TMPF;BLNK;CLCT;BLNK;PP12;PP24"
># nmos_parms: "SKYC:1.0:1;TMPF;BLNK;CLCT;BLNK;PP12;PP06"
># ffg_parms: "STID;ff01;BLNK;ff06;BLNK;ff03;ff12;BLNK;ff24"
># sels_parms: "STID"
>#
>sfc_keys : "sao,syn,sb,amos,mmos,nmos,ffg,nldn"
>sfc_labels : "METAR,Synoptic,Ship / Buoy,AVN MOS, MRF MOS,NGM MOS,Flash Flood,
> Lightning"
>sfc_tables : "sfcparms.lst,shbparms.lst,shbparms.lst,amosparms.lst,mmosparms.l
> st,nmosparms.lst,ffgparms.lst,nldn.lst"
>sao_dir : $(GEMDATA)/surface
>syn_dir : $(GEMDATA)/surface
>sb_dir : $(GEMDATA)/surface
>amos_dir : $(GEMDATA)/mos
>nmos_dir : $(GEMDATA)/mos
>mmos_dir : $(GEMDATA)/mos
>ffg_dir : $(GEMDATA)/storm/ffg
>nldn_dir : $(GEMDATA)/nldn
>sao_parms: "SKYC:1.0:1;TMPF;WSYM:1.0:1;SMSL;P03C;DWPF;P03I;BLNK;BLNK;BLNK;BRBK
> :1.0:1"
>syn_parms: "SKYC:1.0:1;TMPF;WSYM:1.0:1;SMSL;P03C;DWPF;P03I;BLNK;BLNK;BLNK;BRBK
> :1.0:1"
>sb_parms: "SKYC:1.0:1;TMPF;WSYM:1.0:1;SMSL;BLNK;WPER;WHGT;SSTC;BRBK:1.0:1"
>amos_parms: "BLNK;TMPF;BLNK;CLCT;BLNK;PP12"
>mmos_parms: "SKNT;TMPF;BLNK;CLCT;BLNK;PP12;PP24"
>nmos_parms: "SKYC:1.0:1;TMPF;BLNK;CLCT;BLNK;PP12;PP06"
>ffg_parms: "STID;ff01;BLNK;ff06;BLNK;ff03;ff12;BLNK;ff24"
>ltg_parms: "POLR"
>nldn_parms: "STID"
>#
>#-------------------------------------------------------------
># Suface Markers & Filter factor
>#
># List of available marker types and the corresponding labels.
># (See "Marker" entry in Chapter 3 of the NAWIPS Users Guide
># for help.)
>#
># Default filter factor for surface data. 1 = no overlaping
># stations; 0 = all stations plotted, regardless of overlap.
># (See "Filter" entry in Chapter 3 of the NAWIPS Users Guide
># for help.)
>#
>sfc_markers: "3,4,6,14"
>sfc_marker_labels: "Triangle,Box,Diamond,Star"
>sfc_filter: 1
>#
>#-------------------------------------------------------------
># Image maps
>#
># Background images that you can plot along with model and obs
># data. You may have to manually select the color enhancement
># (unidat_top) for these images.
>#
># NOTE that these are IMAGES, and can't be combined (yet) with
># other images such as satellite or radar data.
>#
># These images require 128 image colors. To get this, you
># must start ntl with 128 satellite colors. This is the
># default in NAWIPS 5.4.
>#
>colormapdir : $(GARPHOME)/map/areas
>colormapkeys : "topo_goes8.area,topo_goes9.area,topo_na.area,topo_nh.area,to
> po_sh.area,topo_wh.area,topo_norcal.area,topo_VA.area,topo_CO.area,topo_centr
> alRockies.area,topo_MN.area,topo_midwest.area,topo_southwestUS.area"
>colormaplabels : "GOES-8,GOES-9,North America,Northern Hemisphere,Southern Hem
> isphere,Hemisphere,Northern California,Virginia,Colorado,Central Rockies,Minn
> esota,Midwest,Southwest"
>#
>#-------------------------------------------------------------
># Geographic areas
>#
># You can now configure the regions, projections, and GAREAs of all the
># regions available under the AREA pull-down menu. Here are some starting
># examples. You may configure them.
>#
>MapLabels : "DEFAULT,Northern Hemisphere,North America,CONUS,Northeast,So
> utheast,North Central,South Central,Northwest,Southwest,Canada,Alaska,Hawaii,
> Pacific,Asia,Australia,South America,Africa,Europe,South Pole,North Pole"
>
>MapProjection : "DEFAULT,str/90;-120;10,str/90.0;-100;0.0,lcc/30.0;-100;50.0,
> lcc/30.0;-80;50.0,lcc/30.0;-85;50.0,lcc/30.0;-100;50.0,lcc/30.0;-100;50.0,lcc
> /30.0;-110;50.0,lcc/30.0;-110;50.0,STR/90.00;-98.00;0.00,STR/90.00;-170.00;0.
> 00,CED,lea/25;-155;0,str/60;90;0,str/-60;135;0,str/-60;-50;0,lea/-25;15;5,str
> /60;30;0,str/-90;0;0,str/90;-90;0"
>
>MapGarea : "DEFAULT,-10;-170;-10;10,10;-130;50;-30,23.0;-120.0;47.0;-65.
> 0,35;-90;48;-65,24.00;-95.00;38.00;-73.00,36.00;-112.00;50.00;-86.00,25.00;-1
> 10.00;40.00;-85.00,37.00;-125.00;50.00;-105.00,25.00;-122.00;40.00;-95.00,#48
> .00;-72.00;12.00;61.00,50.00;-180.00;60.00;-110.00,#20.50;-157.00;2.50;3.00,#
> 25;-155;40;55,0;60;60;170,-45;90;0;170,-45;-100;15;-25,-30;-10;40;55,30;5;70;
> 60,20;-135;20;45,-20;-135;-20;45"
>#
>#
># Default map areas and projections for each model type. Use the
># string defined in "modelkeys" to specify the model. If no spec
># exists for a given model, default_proj and default_garea are used.
>#
>avn_proj : str/90.0;-100;0.0
>avn_garea : 10;-130;50;-30
>avn003_proj : str/90;-120;10
>avn003_garea : -10;-170;-10;10
>eta211_proj : lcc/30.0;-100;50.0
>eta211_garea : 23.0;-120.0;47.0;-65.0
>eta.gem_proj : lcc/30.0;-100;50.0
>eta.gem_garea : 23.0;-120.0;47.0;-65.0
>e10_proj : mer/27;-126;45;-106
>e10_garea : 27;-126;45;-106
>ngm_proj : lcc/30.0;-100;50.0
>ngm_garea : 23.0;-120.0;47.0;-65.0
>ngm211_proj : lcc/30.0;-100;50.0
>ngm211_garea : 23.0;-120.0;47.0;-65.0
>mrf003_proj : str/90;-120;10
>mrf003_garea : -10;-170;-10;10
>mrf002_proj : str/90;-120;10
>mrf002_garea : -10;-170;-10;10
>mrf_proj : str/90;-120;10
>mrf_garea : -10;-170;-10;10
>ruc.gem_proj : lcc/30.0;-100;50.0
>ruc.gem_garea : 23.0;-120.0;47.0;-65.0
>rsas_proj : lcc/30.0;-100;50.0
>rsas_garea : 23.0;-120.0;47.0;-65.0
>ens_proj : str/90;-120;10
>ens_garea : -10;-170;-10;10
>ruc211_proj : lcc/30.0;-100;50.0
>ruc211_garea : 23.0;-120.0;47.0;-65.0
>maps_proj : lcc/30.0;-100;50.0
>maps_garea : 23.0;-120.0;47.0;-65.0
>default_proj : lcc/30.0;-100;50.0
>default_garea : 23.0;-120.0;47.0;-65.0
>#
>#-------------------------------------------------------------
># FDF & Macro chapters.
>#
># These chapters are subdirectories which discriminate between
># families of FDFs and macros. For each list of chapters, you
># must also define a list of button labels.
>#
># Scalar, Vector, XSScalar (scalar cross section), XSVector
># (vector cross section), THScalar (time/height scalar), THVector
># (time/height vector), VPScalar (vertical profile scalar),
># VPVector (vertical profile vector).
>#
>ScalarChapter : general,convective,HAS,isentropic,maxT_est,macros,macros_850m
> b,macros_700mb,macros_500mb,macros_250mb
>SCLabels : General,Convective,HAS,Isentropic,MaxT_est,Macros,850mb_Macro
> s,700mb_Macros,500mb_Macros,250mb_Macros
>VectorChapter : general
>VCLabels : General
>XSScalarChapter : general,macros
>XSSCLabels : General,Macros
>XSVectorChapter : general
>XSVCLabels : General
>THScalarChapter : general,macros
>THSCLabels : General,Macros
>THVectorChapter : general
>THVCLabels : General
>VPScalarChapter : general,macros
>VPSCLabels : General,Macros
>VPVectorChapter : general
>VPVCLabels : General
>#
>#-------------------------------------------------------------
># Model dialog line parameters.
>#
>linetypekeys : "1,2,3,4,5,6,7,8,9,10"
>linetype : "Solid,Short dashed,Medium dashed,Long & short dash,Long dash
> ,Long dash 3 short,Long dash dot,Long dash 3 dots,Medium dash dot,Dotted"
>labelfreqkeys : "0,1,2,3,4,5"
>labelfreq : "No labels,Every line,Every 2nd line,Every 3rd line,Every 4th
> line,Every 5th line"
>#
>#-------------------------------------------------------------
># Model dialog vector symbols. These symbols will appear as options
># when the "More" button is pressed for model dialogs.
>#
>vectorkeys : "bm,bk,am,ak,an,st"
>vectorsymbols : "Barb (m/s),Barb (knots),Arrow (m/s),Arrow (knots),Arrow (oth
> er),Streamlines"
>VertVectorkeys : "bm,bk,am,ak,an"
>VertVectorsymbols : "Barb (m/s),Barb (knots),Arrow (m/s),Arrow (knots),Arrow (
> other)"
>#
>#-------------------------------------------------------------
># Cross section vertical axis scale. Do not add additional axes.
>#
>yaxiskeys : "log,lin"
>yaxislabels : "Logarithmic,Linear"
>#
>#-------------------------------------------------------------
># Vertical profile vertical axis scale. Do not add additional axes.
>#
>vpyaxiskeys : "log,lin,skewt,stuve"
>vpyaxislabels : "Logarithmic,Linear,Skew-T,Stuve"
>#
>#-------------------------------------------------------------
># Time/height time axis scale. Do not change.
>#
>thtaxiskeys : "R,F"
>thtaxislabels : "Increasing to left,Increasing to right"
>#
>#-------------------------------------------------------------
># Wind Profiler keys.
>#
>wpbottom : 0
>wptop : 10000
>wpincrement : 1000
>wpduration : 24
>wptimeint : 60
>wpendtime :
>#
>#-------------------------------------------------------------
># End of dynamically generated menus.
>#
>
>#--------------------------------------------------------------
># Additional configurataions:
>#
>#--------------------------------------------------------------
>#
># Thermodynamic diagram settings.
>#
># stndex - defines a list of stability indices and thermodynamic
># parameters which are displayed on a thermodynamic diagram
># (Skew-T or Stuve). See the GEMPAK variable STNDEX for a list
># of valid parameters and syntax. Valid for upper air data
># vertical profiles only.
>#
># SkewtXAxis, StuveXAxis
># - defines the GEMPAK "xaxis" parameter used when plotting
># SkewT-logP and Stuve diagrams, respectively. See the
># GEMPAK variable XAXIS for syntax. Valid for upper air
># data and model data vertical profiles.
>#
>stndex : selv;lift;kinx;totl;swet;lclp;lfcv;eqlv;cape;cins;brch
>SkewtXAxis : ///;1
>StuveXAxis : -100/30/20/1
>
>#
># Widget defaults
>#
># Choose default values for the model, vertical coordinate, levels,
># function, default fdf chapters, cross-section line, time-height
># station, vertical profile axis types, radar ring station, upper
># air levels and upper air filter.
>#
>model : eta211
>vcoord : pres
>level1 : 500
>level2 : 1000
>fdf : "Temp_C"
>fdf_directory : general
>xsfdf : "Theta_K"
>xsfdf_directory : general
>thfdf : "Theta_K"
>thfdf_directory : general
>vpfdf : "Temp_C"
>vpfdf_directory : general
>cross-section : vbg>dnr
>time-height_stn : DNR
>yaxistype : log
>vpyaxistype : skewt
>rring_stid : FTG
>upalevels : Surface,1000,925,850,700,500,400,300,250,200,150,100,70,50,30
> ,20,10,Top
>upa_filter : 0.5
>
>#
># Auto Update.
>#
># Set to yes or no. The units of update_timer is minutes.
># Valid entries are 1 to 60.
>#
>autoupdate : no
>update_timer : 5
>
>#
># List of times in date/time scrolled lists for model data.
>#
># Generally, this is "all" to present all model times. An alternative
># is "analysis" to show only model analysis times.
>#
>TimesInList : all
>
>#
># Time match type.
>#
># Valid values are "strict" (meaning that a time interval will is applied
># to the time match), "closest" (to match the closest time), and "none"
># (for no time matching). Time matching applies only to plan view data.
>#
>TimeMatch : none
>
>#
># Time match intervals for "strict" time matching.
>#
># Intervals in seconds. If the data to be time matched lies within the
># time interval given below, a valid time match will be found.
>#
>SfcObsTimeInterval: 3600
>UpaObsTimeInterval: 43200
>RadarTimeInterval: 900
>SatelliteTimeInterval: 3600
>
>#
># Hypertext browser command and Starting URLs (or files).
>#
># If the Browser command is "netscape %s", and Netscape is already running,
># then GARP will try to open the URL in a new Netscape window. Otherwise,
># GARP will launch the browser command listed. (The %s is the URL placeholder.
> )
>#
>GarpHTML : $(GARPHOME)/html
>Browser : "netscape -install %s"
>UserGuide : $(GarpHTML)/UserGuide.html
>CaseStudies: http://www.comet.ucar.edu/resources/cases/
>
>#
># Dwell settings for animations
>#
># You can customize the dwell settings for animations. The default
># dwell is used when you start GARP, and there are 5 pre-defined
># dwell groups available. Dwell settings are composed of three values;
># the first frame, intermediate and final frame pause. Values are in
># seconds. The speeds should get faster as you go from preset
># dwell 1 to 5. Also, you may change the min and max allowed
># values for the dwell settings on the slider bars. The internal
># defaults are 0 and 3 seconds.
>#
>defaultdwell : "0.60,0.10,0.60"
>presetdwell1 : "2.50,1.50,2.00"
>presetdwell2 : "1.20,0.66,0.90"
>presetdwell3 : "0.90,0.33,0.60"
>presetdwell4 : "0.60,0.10,0.50"
>presetdwell5 : "0.20,0.05,0.20"
>dwellmin : "0.01"
>dwellmax : "3.00"
>
>#
># Status bar and units
>#
># This is the information that will be displayed on the status bar
># by default. Allowable items are:
>#
># clock ticking clock
># windowcoords X,Y coordinate of mouse pointer
># plotcoords mouse pointer position in plotting coordinates
># pixelvalue image pixel value
># distcalc distance and range calculator
>#
>statusbaritems : "clock,windowcoords,plotcoords,pixelvalue,distcalc"
>
>#
># Define the units for image brightness temperature and distances.
># Internal defaults are "degrees C" for temperature and "km" for
># distance. Allowable values are:
>#
># temperature: C, K or F (Celcius, Kelvin, Fahrenheit)
># distance: KM, MI, or NM (Kilometers, Miles, Nautical miles)
>#
>tempunits : C
>distunits : KM
>
>#
># Lat/Lon Grid defaults.
>#
># Define default lat/lon lines, increment, labelling, color, line
># type and line width. (See "latlon" in Chapter 3 of the NAWIPS
># Users Guide for help.)
>#
>latlon: no # lat/lon grid, yes or no
>latinc: 5.0 # latitude increment (degrees)
>loninc: 5.0 # longitude increment (degrees)
>label_freq: 2 # label frequency
>gridlinecolor: 2 # line color (GEMPAK color number)
>gridlinetype: 10 # line type (GEMPAK line types)
>gridlinewidth: 1 # line width
>
>#
>#-----------------------------------------------------------------------
># Static configurations
>#
># You should not have to change anything else in this file, unless
># you have a very good reason.
>
>#
># Minimum size of zoom box (in pixels) before zooming occcurs.
># To prevent zooming by mistake. Leave as is.
>#
># Zoom box color. GEMPAK color number used when drawing the zoom box.
># The zoom box will NOT necessarliy appear in this color, especially
># over images, since the color actually drawn is a combination of color
># indices. Leave alone unless the zoom box does not appear (is black)
># on some plots. (Color 1 is off-white)
>#
>minzoomboxsize : 20
>zoomboxcolor : 1
>
>#
># GARP icon directory (do not change)
>#
>ICONDIR : $(GARPHOME)/icons
>
>#
># Tables used for overlaying the location of certain station types
># i.e. surface, sounding, profiler, NEXRAD sites, etc.
># (Do not change)
>#
>tabledir : $(GARPHOME)/tables
>
>#
># Color enhancement tables
># Found in tabledir
># (Do not change)
>#
>mastertbl : master_garp.tbl
>satenhancetbl : sat_enhance.tbl
>radenhancetbl : rad_enhance.tbl
>
>#
># Map list table file (don't change)
>#
>maplisttbl : maplist.tbl
>
># Location of FDF (Field Description File) files
># (Do not change, unless you have a different FDF directory)
>#
>fdfdir : $(GARPHOME)/fdf # FDF Directory
>valid_fdf_keys : $(fdfdir)/valid_fdf_keys # Valid keys file
>scalarfdf : $(fdfdir)/scalar/ # Plan view scalar FDFs
>vectorfdf : $(fdfdir)/vector/ # Plan view vector FDFs
>xsscalarfdf : $(fdfdir)/xsscalar/ # Cross section scalar FDFs
>xsvectorfdf : $(fdfdir)/xsvector/ # Cross section vector FDFs
>thscalarfdf : $(fdfdir)/xtscalar/ # Time/height scalar FDFs
>thvectorfdf : $(fdfdir)/xtvector/ # Time/height vector FDFs
>vpscalarfdf : $(fdfdir)/vpscalar/ # Vertical profile scalar FDFs
>vpvectorfdf : $(fdfdir)/vpvector/ # Vertical profile vector FDFs
>
># File name template strings.
>#
># Each component of the template strings must match up one for one
># with the data directories defined above
>#
># Don't worry about matching up the "model" or "type" strings
>#
># Unless you've changed the Data Directory structures above,
># you shouldn't have to change these lines.
># Use the following for YYMMDD convention
>#nidsT : $(nids)/%(site)/%(product)/*_@(YYMMDD)_@(HHNN)
>#nowradT: $(nowrad)/%(resolution)/%(product)/*_@(YYMMDD)_@(HHNN)
>#gridsT : $(grids)/@(YYMMDDHH)_*.gem
>#surfaceT : $(surface)/@(YYMMDD)_sao.gem
>#upperairT : $(upperair)/@(YYMMDD)_upa.gem
>#profilerT : $(profiler)/@(YYMMDDHH)_6min.gem
>#satT : $(SATDIR)/%(platform)/%(resolution)/%(product)/*_@(YYMMDD)_@(HHNN)
>#
>nidsT : $(nids)/%(site)/%(product)/*_@(YYYYMMDD)_@(HHNN)
>nowradT: $(nowrad)/%(resolution)/%(product)/*_@(YYYYMMDD)_@(HHNN)
>satT : $(SATDIR)/%(platform)/%(resolution)/%(product)/*_@(YYYYMMDD)_@(HHNN)
>gridsT : $(grids)/@(YYYYMMDDHH)_*.gem
>surfaceT : $(surface)/@(YYYYMMDD)_sao.gem
>upperairT : $(upperair)/@(YYYYMMDD)_upa.gem
>profilerT : $(upperair)/@(YYYYMMDDHH)_6min.gem
>
>#------------------------------------------------------------------------
>
>
>Thanks.
>
>Pat
>
>
